Almost New, Pre-Owned, Refurbished, & Demo Devices For Sale.
Pre-owned devices have higher meter reads and therefore less life left in them. ‘Almost New’ devices are not new, but have very low meters and are available for HUGE discounts of 50-75% off their original retail price. They either weren’t used to their capacity by their previous owners during their typical 4 or 5 year leases, or are lease returns from companies that closed down. Here are some recent examples of the deals our customers got:
75ppm colour high volume multifunction with 100-sheet staple/booklet finisher and post inserter purchased in summer 2021. This model was sold as new up until February 2021! Typical print volume for the C759 is 16k/month. That means after a typical 5 year lease this device would have had roughly 960K copies on it, but this one had only 249k! Only 1/4 of its expected print volume. Customer got it for 54% off the original retail price!
30ppm monochrome multifunction, only 1 generation old. Came with a 100-sheet single pass document feeder and 2 universal paper trays. Typical print volume for this device is 5k/month. After a typical 5 year lease it should have 300k copies on it, but this one had only 80k! Again, only 1/4 of its expected print volume. Customer got it for 55% off the original retail price!
30ppm monochrome multifunction, 2 generations old. Came with 100-sheet single pass document feeder and 4 universal paper trays. Typical print volume for this device is 6500/month. After a typical 5 year lease it should have 390k copies on it, but this one had only 55k, only 14% of its expected print volume! Customer got it for 74% off the original retail price!
**Inventory and available accessories vary. Contact us for details and for a quote on currently available stock. Please note that if stock is not in our possession (see below), we cannot guarantee availability for long once we provide the quote. Please be ready to proceed quickly once you receive the quote.
Contact us for details.
This unit has been used as our Konica Minolta showroom device, but as of June 2024, the new generation was launched, so time to find this device a good home!
Comes with two built-in 500-sheet universal paper trays, 150-sheet bypass tray, and the fast single pass document feeder. However, since the new series has the same accessories, it can still be customized with new high capacity paper trays, G3 fax, and a finisher if needed.
Only 12k copies on it! That’s only a few months’ worth of prints for most offices. As is for $5000, including onsite setup, and delivery to Powell River (extra shipping costs may apply to the Lower Sunshine Coast). That’s 40% off the price of a new one!
Contact us for details and to request a quote for any accessories required.
Lightly used device with a very long life ahead of it. 1 generation old. Has a standard 50-sheet Single Pass document feeder and a very low meter count!
Storage cabinet for adding height, storing toner and paper, and for getting the device off your busy desk available for just $150! An extra paper tray for legal paper or just for more letter capacity is available new for $350. (Device with extra tray and cabinet pictured at right).
G3 fax kit available ($300).
Brand new was $3679 plus the cost of accessories. Yours for just $1400 plus tax (without the extra accessories).
Current Meter Read: Approximately 43.6K!
Contact us for details.
Lightly used device with a very long life ahead of it. 2 generations old. Only a minor flaw in the print quality that only shows up if you’re printing pictures. Black and white printing is pristine! Has a standard 50-sheet document feeder and a very low meter count!
Extra 500-sheet paper tray available for legal sized paper ($175).
Storage cabinet for adding height, storing toner and paper, and for getting the device off your busy desk available for just $150! (Device with extra tray and cabinet pictured at right).
G3 fax kit available ($300).
Brand new was $3875 plus the cost of accessories. Yours for just $800 plus tax (without the extra accessories).
Current Meter Read: Approximately 17,000!
Contact us for details.
Comes with two built-in 500-sheet universal paper trays, a 2500-sheet high capacity letter paper tray, a 150-sheet bypass tray, and a fast single pass document feeder. G3 fax available if needed. Finisher does 50-sheet stapling without taking up a lot of space (device with inner finisher pictured at right).
Current meter is 429k (278k of that in colour). Copier without the finisher: $3800 including onsite setup, and delivery to Powell River (extra shipping costs may apply to the Lower Sunshine Coast). Copier with the inner staple finisher: $4300
Contact us for details and to request a quote for any accessories required.
Comes with four 500-sheet universal paper trays, a 150-sheet bypass tray, and a fast single pass document feeder. G3 fax available if needed. Finisher does 50-sheet stapling, hole punching, and up to 20-sheet (80-page) booklets center stapled and folded, as well as trifolding. (Copier with finisher pictured at right).
Current meter is 252k (158k of that in colour). Copier without the finisher: $3800 including onsite setup, and delivery to Powell River (extra shipping costs may apply to the Lower Sunshine Coast). Copier with the booklet finisher and hole punch kit: $4750
Contact us for details and to request a quote for any accessories required.
This unit was moderately used by its previous owner, so it still has lots of life left in it. Currently in our showroom with a booklet finisher and hole punch kit on it. Available with or without the finisher.
Comes with two built-in 500-sheet universal paper trays, a 2500-sheet high capacity letter tray, 150-sheet bypass tray, and the fast single pass document feeder. However, since the new series has the same accessories, it can still be customized with new G3 fax if needed. Optional finisher does 50-sheet stapling, hole punching, and up to 20-sheet (80-page) booklets center stapled and folded, as well as trifolding. (Copier with finisher pictured at left).
Current meter is 195k (94k of that in colour). Copier without the finisher: $4000 including onsite setup, and delivery to Powell River (extra shipping costs may apply to the Lower Sunshine Coast). Copier with the booklet finisher and hole punch kit: $5000
Contact us for details and to request a quote for any accessories required.
Devices may not be configured exactly as shown.
All pre-owned devices have been inspected, cleaned, and refurbished with new parts when needed. Configured and sold as is unless otherwise specified.
Price Match Guarantee does not apply to pre-owned devices.
Don’t see what you need? No problem! We work with several suppliers, including the original manufacturers, and have access to a wide range of pre-owned devices. Let us know what you need and we’ll find it for you!